Exemption for model aircraft fix wing from currant FAA limit 250g limitation to 2kg

Exemption for model aircraft fix wing from currant FAA limit 250g limitation to 2kg

0 have signed. Let’s get to 100!
At 100 signatures, this petition is more likely to be featured in recommendations!
David Smith started this petition to Federal Governmen and FAA

Exemption for model aircraft fix wing from currant FAA limit 250g 0.55pounds limitation as stated in the FAA ruling ( Unmanned aircraft that weigh 0.55 pounds or less on takeoff, including everything
that is on board or otherwise attached to
the aircraft.)to 2kg built of at least 50% by weight above 250 grams using balsa wood, foam and or covering materials.
Still limited to a maximum altitude off the ground to 122 meters.
Speed limit to 48 knots.
Only for non commercial uses, hobby use only.
Not for multi rotor drones with and or without cameras still limit to 250grams per FAA.

Definition of Model Aircraft
Built from tradition building materials (wood and or foam with covering)
Does not need a gyro to fly
Fix wing design .
Typically made at home
Does not have camera to fly.
Flies line of sight only.

Definition of a Aircraft Drone
Has multi motors
Needs more than 3 motors to fly.
Needs a gyro to fly
Primary made from plastic
Typically flies by a camera
Typically ready to fly.

0 have signed. Let’s get to 100!
At 100 signatures, this petition is more likely to be featured in recommendations!